Russia China
English (USA/CDN/UK)Deutsch (DE-CH-AT)
Home Enclosures
Instrumentation enclosures - ultra-strong yet light and durable

INTERTEC offers six standard enclosure ranges for protecting field-mounted equipment. The range of form factors and installation features, combined with the choice of sizes, allows optimal and cost-effective environmental protection to be configured easily for virtually any instrumentation or control application. The enclosures are made from a special high-performance grade of glass fiber reinforced polyester (GRP). This fire-resistant material is very stable, almost immune to damage from chemical and petrochemical media, and has a strength that almost matches stainless steel - for just a quarter of the weight! (See INTERTEC's GRP material.)

MULTIBOX (top or bottom tube entry)

MULTIBOX is a two-part enclosure that can be mounted vertically or horizontally, and with either the deep or shallow section used as the door (making it easy to access almost every part of the equipment). Instrumentation is usually mounted via C-rails, with tube entry at the top or bottom. Seven standard sizes provide volumes from 25 to 170 liters/0.88 to 6 ft3.

DIABOXâ„¢ (rear or bottom tube entry)

DIABOXâ„¢ is a two-part enclosure with a diagonal opening, providing very easy access to field equipment for maintenance. Tube entry is typically made via the rear or the base. There are three sizes, each of which may be installed vertically or horizontally. When vertically mounted, sizes range from 87 to 187 liters / 3.07 to 6.6 ft3.

MINIBOX 21 (for direct mounting)

This compact enclosure is sized to provide cost-effective housing to protect close-coupled single-transmitter installations from overheating. It can also be equipped to provide freeze protection. Its two-part oblong-shape measures 21.8 x 30 x 38.8 cm (21 litres / 0.74 ft3). A patented design allows both sides of MINIBOX to be made to open around the hinge by - completely exposing the equipment for easy field access.

UNIBOX (bottom tube entry)

UNIBOX is a two-part enclosure with a large top half that folds away to provide open and easy access to the top, front, back and sides of field equipment for maintenance. It is ideal where tube entry needs to be made via the base. There are four sizes ranging from 43 to 63 litres / 1.5 to 2.2 ft3.

MESC enclosure (meeting Shell standards)

A two-part enclosure for protecting field instrumentation, with removable flaps for operation of the manifold, fabricated to meet Shell's MESC standard.

BASIC VARIO (rear or top/side tube entry)

BASIC VARIO wall/floor-mounting enclosures are made using Intertec's unique sandwich-construction, with GRP skins enclosing foam for efficient insulation (and quick payback from energy savings). Three standard sizes from 235-309 liters (8.3-10.9 ft3) offer volumes that sit between the upper limits of many field instrument enclosures and smaller cabinets. Flat exterior surfaces allow enclosures to be packed together.

 

Designing your own enclosure?

Avoiding thermal 'short cuts' makes design easier

What forms of protection are possible?
More

Do-it-yourself integration

We offer free software to help you configure your own enclosure, cabinet or shelter scale solutions faster and more efficiently.

Turnkey design/build

The SAFE LINK service creates complete system solutions, tailor-made for your needs. Our systems are much more than the sum of their parts - you get truly integrated solutions with added-value performance and reliability derived from know-how gained on thousands of similar applications.

INTERTEC's datasheet library.
More

-
+
1

Options/accessories

A large number of options and accessories from windows to mountings make configuration simple. For an overview of major enclosure accessories such as sunshades, insulated entries/exits, etc, click here.